DIY IKEA Kids Table Makeover

If you go on Pinterest and type in “kids table” you will see a dozen or so IKEA Hacks – where people buy IKEA’s $19.99 Latt Children’s Table and update the plain white and wooden set! There are some really cute ideas out there which inspired me to try it myself. It was fairly simple to do, and because I had so much of what I needed at home, fairly inexpensive. Here is what you will need to do this craft! (The items that I bought I listed the price of, but the rest I already had!)

Supplies List:

  • IKEA LATT Children’s Table $19.99
  • Paper Source – Birch Floral Paper $5.95
  • 0.08 Sheet of Plexiglass $10.97
  • White High Gloss Paint
  • Design Masters Gold Spray Paint
  • Painters Tape
  • Measuring Tape
  • Scissors
  • Sand Paper
  • Paint Brush
  • Brown Paler/Some Form of Drop Cloth

The first thing I did was spray paint the legs. I knew I wanted 3 inches of gold before the table was painted white. However, looking back I wish I had painted the table white and spray painted second. I think it would have given me cleaner lines. (On one of the table legs paint dripped down through the painters tape. It’s not the end of the world, but still not my favorite thing). Also, if you don’t follow my blog you should know that I use this spray paint for everything!! I am beyond obsessed with it. I used it for the first time in a dresser restoration project for the nursery, then for a nursery accent piece, and by now I’ve used it for a dozen other projects! I am so thrilled with how well it applies and endures. It’s an A+ product for sure.

Anyways, after I spray painted the legs I painted everything else white. It will be so much easier for you if you paint this before assembling it!! When it came to the table and chair legs I simply measured three inches from the base up and then used painters tape to section it off.

After everything is dry you can assemble it! It shouldn’t take you too long, it’s a fairly simple “instal.” The next part I had a surprising amount of difficulty. I had bought a gorgeous price of wrapping paper from Paper Source to be my tabletop. I had assumed I could just trace the table insert from IKEA. However, the notch that the table fits into when assembled was so tight I couldn’t even get my paper to slide in. What I ended up going was after the table was entirely assembled I pressed the paper into the four sides of the paper (so the extras were folded). Then I used a pen knife to trace out the paper. This worked well, but it took me way too long to come to that conclusion!

Lastly, I used plexiglass to “seal” the paper in. I bought a sheet at Lowes because I had read that they will cut it for free for you – and they do! They couldn’t notch out the corners (because of the construction of the table it’s not a perfect right angle rectangle) but they did trim it down to the right size! When I got home I just used a fine grit sandpaper to round off the corner edges and that worked perfectly! It’s supposed to be cut at 23 3/8″ by 17 3/8″ according to several blogs I read. For me, the plexiglass came out a tiny bit too big, but a little sanding made it perfect. I think that could have been from the man who cut it though! Apparently it was his first time.

I am so glad that I decided to go this route. Originally I was going to modge podge the table, but this is way better. The plexiglass will be super easy to clean off. Also, I can remove it whenever I like. This means I can replace the paper if it ever gets damaged- I also can change the paper out based on the season, holiday, or my mood! That’s actually why I chose a white base for my table. At first I was going to paint it a light blue, but then I realized I was just feeling it today. Who knows how I will feel next month! Instead I got the paper with blue. The white will match almost anything else I bring home in the future. Another thing I loved, but didn’t do was to cushion the seats. I was intending to, but then realized that a fabric would limit what I could do with the table top.

Once that plexiglass is laid down you’re all set! I am so obsessed with this table. Next weekend I am going to add paper and plexiglass to the chairs as well. They have the same build as the table, so you would literally follow those instructions, just on a smaller scale. Once I try it I will add my measurements to this post!

If you decide to try this make sure you tag me- @wifetalk. I would love to see what creative ideas you come up with. It’s so fun to support each other!

* the most helpful blog I read was Milk & Mascara! She had an easy to understand guide.

Advertisements